explosion

Larson Electronics Releases Explosion Proof Plug W/ Tri-Tap Receptacle, 6″ 12/3 SOOW

Press Release – updated: Jan 24, 2020 07:00 CST

KEMP, Texas, January 24, 2020 (Newswire.com) – Larson Electronics, a Texas-based company with over 40 years of experience spearheading the industrial lighting and equipment sectors, announced the release of an explosion proof plug with tri-tap receptacle for outdoor and heavy-duty use. This durable extension cord is made from six inches of 12-gauge, 3-conductor wire and equipped with a 15-amp rated explosion proof 5-15 male cord cap.
The EPP-3X-15A explosion proof plug is rated for use in Class I, Division 1 hazardous locations. This unit is made up of 6” of 12/3 SOOW cord terminated in a male NEMA 5-15, 15-amp rated, explosion proof cord cap. Operators can connect up to three devices via a tri-tap receptacle. This line cord is approved for hot work permit locations and allows operators to use non-explosion proof equipment in hazardous environments.
Larson Electronics’ explosion proof plug carries a voltage rating of 120V and a maximum amp rating of 15 amps. This 6” unit weighs just 1.5 lbs and is suitable for use indoors and outdoors, for chemical manufacturing, food processing plants, cold storage, and more.
About Larson Electronics LLC: Larson Electronics LLC is a manufacturer of industrial lighting equipment and accessories. The company offers an extensive catalog of industry-grade lighting and power distribution products for the following sectors: manufacturing, construction, food processing, oil and gas, military, marine and automobile. Customers can benefit from the company’s hands-on, customized approach to lighting solutions. Larson Electronics provides expedited service for quotes, customer support and shipments.
Source: Larson Electronics

Larson Electronics Releases 24V DC Explosion-Proof Switch, 5A, CID1, 2-Pole On/Off Switch

Press Release – updated: Jan 23, 2020 07:00 CST

KEMP, Texas, January 23, 2020 (Newswire.com) – Larson Electronics, a Texas-based company with over 40 years of experience spearheading the industrial lighting and equipment sectors, announced the release of an explosion-proof switch that provides on and off control for connected machines, motors and equipment in hazardous locations. This unit is rated for use in Class I, Divisions 1 and 2 hazardous environments. This switch is made of malleable iron and operates on 24V DC.
The EPCS-SW1-PLG-V2 explosion-proof switch is rated for use in Class I, Divisions 1 and 2, Groups B, C and D; Class II, Divisions 1 and 2, Groups E, F and G; and Class III hazardous locations. This 2-pole unit is rated at 5 amps and is compatible with 24V DC. This unit features a green LED pilot light in a forward-facing configuration that alerts operators about the on/off switch status.
Larson Electronics’ explosion-proof switch cover and housing box are made of malleable iron. This unit comes in a dead-end or feed-through configuration and operators can choose several hub sizes, including 1/2″, 3/4” or 1”. Secure mounting to walls and other flat surfaces is achieved via two external mounting lugs. Suitable applications include industrial, manufacturing, lighting, and more.
About Larson Electronics LLC: Larson Electronics LLC is a manufacturer of industrial lighting equipment and accessories. The company offers an extensive catalog of industry-grade lighting and power distribution products for the following sectors: manufacturing, construction, food processing, oil and gas, military, marine and automobile. Customers can benefit from the company’s hands-on, customized approach to lighting solutions. Larson Electronics provides expedited service for quotes, customer support and shipments.
Source: Larson Electronics

Larson Electronics Releases Explosion Proof LED Light, 150W, 5' Base Stand Mount, 17,500 Lumens

Press Release – updated: Jan 22, 2020 06:00 CST

KEMP, TEXAS, January 22, 2020 (Newswire.com) – Larson Electronics, a Texas-based company with over 40 years of experience spearheading the industrial lighting and equipment sectors, announced the release of an explosion proof LED light for use in Class I, Divisions 1 and 2 hazardous locations. This unit features 16 Cree LEDs that produce a total of 17,500 lumens of light while drawing on 150 watts. This light provides 10,000 square feet of coverage and is mounted on a 22” wide four leg aluminum base.
The EPL-24BS-5FT-1X150LED-40M-IEC16A.230V explosion proof LED light on aluminum stand is rated for use in Class I, Divisions 1 and 2, Groups C and D; Class II, Divisions 1 and 2, Groups E, F and G; and Class III, Divisions 1 and 2 hazardous locations. This LED light measures 16” wide by 14” tall and can easily be adjusted up or down 90˚ and can rotate 360˚ and can be locked into place.
Larson Electronics’ explosion proof LED light comes with 100 feet of 16/3 SOOW cord that is terminated in an IEC 60309 16-amp pin/sleeve cord cap. This unit features several beam angles, including 60˚ intense beam, 125˚ beam for diffused light, and 140˚ beam. This light is configured to operate on 120-277V 50/60Hz and features 25 peel-off mylar overspray lamp protectors that come with the unit. Suitable applications include hazardous locations, chemical plants, manufacturing and more.
 
About Larson Electronics LLC: Larson Electronics LLC is a manufacturer of industrial lighting equipment and accessories. The company offers an extensive catalog of industry-grade lighting and power distribution products for the following sectors: manufacturing, construction, food processing, oil and gas, military, marine and automobile. Customers can benefit from the company’s hands-on, customized approach to lighting solutions. Larson Electronics provides expedited service for quotes, customer support and shipments.
Source: Larson Electronics

Larson Electronics Releases 50W Explosion Proof Solar Panel, 12V, IP65 Junction Box, CID2

Press Release – updated: Jan 21, 2020 07:00 CST

KEMP, Texas, January 21, 2020 (Newswire.com) – Larson Electronics, a Texas-based company with over 40 years of experience spearheading the industrial lighting and equipment sectors, announced the release of a 50-watt explosion proof solar panel with pole mount clamp. This high-output module is designed for solar-powered systems in Class I, Division 2 hazardous locations. This 12V unit comes with 36 crystalline silicon cells and an IP65-rated junction box.
The HAL-PM-SPNL-50 explosion proof pole clamp mounted solar panel is 50 watts and operates on 12V with a module efficiency rate of 11.1 percent. This unit offers 17.9V and a current of 2.79 amps at maximum power. This unit is rated for use in Class I, Division 2 hazardous locations and features a Class C application class. This module comes with an 8A maximum fuse rating and weighs just 13.2 lbs.
Larson Electronics’ explosion proof solar panel features a frame made of silver anodized aluminum with a back cover made of white polyester for insulation. The front cover is made of high-transmission glass that is 1/8” thick. Four terminal screw connection blocks are available and can accept 8-14 AWG wires. This unit features a pole clamp mounting system allowing the solar panel to be securely mounted to vertical poles or pipes of different diameters.
Each solar panel has two clamps and once mounted the unit can hold at a 45˚ angle from the pipe or pole it is mounted to. Suitable applications include hazardous locations, chemical processing plants, solar-powered systems, refineries, and more.
 
About Larson Electronics LLC: Larson Electronics LLC is a manufacturer of industrial lighting equipment and accessories. The company offers an extensive catalog of industry-grade lighting and power distribution products for the following sectors: manufacturing, construction, food processing, oil and gas, military, marine and automobile. Customers can benefit from the company’s hands-on, customized approach to lighting solutions. Larson Electronics provides expedited service for quotes, customer support and shipments.
Source: Larson Electronics